
Material Handler
부품 목록 (135)

Technic Pin with Friction Ridges Lengthwise with No Center Slots
×122
Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot
×103
Technic Axle Pin with Friction Ridges Lengthwise
×42
Technic Axle and Pin Connector Perpendicular
×22
Technic Axle 3
×19
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle
×15
Technic Beam 1 x 3 Thick
×15
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]
×15
Technic Pin Connector Round 1L [Beam]
×14
Technic Pin Long 3l, No Friction Ridges, with Stop and Hole
×13
Technic Axle 2 Notched
×12
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
×11
Technic Beam 2 x 4 L-Shape Thick
×10
Technic Beam 1 x 11 Thick
×10
Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick
×10
Technic Axle 5
×9
Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
×9
Technic Axle 4 with Stop
×9
Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8
×8
Technic Beam 2 x 4 L-Shape Thick
×8
Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole
×8
Technic Beam 1 x 7 Thick
×8
Technic Beam 1 x 11 Thick
×8
Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole
×8
Technic Beam 3 x 3 T-Shape Thick
×8
Technic Axle Pin 3L without Friction Ridges and 2L Axle
×8
Technic Axle 3 with Stop
×7
Technic Gear 12 Tooth Double Bevel
×7
Technic Beam 1 x 5 Thick
×7
Technic Bush
×7
Technic Pin 1/2
×7
Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes]
×7
Technic Beam 3 x 3 T-Shape Thick
×7
Technic Axle 5 with Stop
×6
Technic Beam 1 x 4 Thin with Stud Connector
×6
Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole
×6
Technic Beam 1 x 15 Thick
×6
Technic Beam 1 x 15 Thick
×6
Technic Beam 1 x 13 Thick
×6
Technic Pin Connector 3L with 2 Pins and Center Hole [Pin Ridges Across Part]
×6
Pneumatic Hose Connector with Axle Connector
×6
Technic Pin Connector Hub with 2 Axles
×5
Technic Axle and Pin Connector Angled #2 - 180°
×5
Technic Driving Ring Connector Smooth [2 rounded and 2 flat side walls]
×5
Technic Beam 1 x 2 Thick
×5
Hose, Pneumatic 4mm D. 5L / 4cm
×5
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]
×5
Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick
×5
Technic Pin Connector Hub with 2 Perpendicular Axles
×4
Tyre 49.53 x 20
×4
Technic Grabber Arm Claw with 3L Thick Beam [Type 2]
×4
Technic Beam 3 x 3 L-Shape Thin
×4
Technic Axle and Pin Connector Perpendicular Double
×4
Technic Beam 1 x 5 Thick
×4
Technic Beam 1 x 7 Thick
×4
Technic Bush
×4
Technic Beam 1 x 2 Thin
×4
Technic Pin Connector Perpendicular 2 x 2 Bent
×4
Wheel 30.4 x 20 without Pinholes, with Reinforced Rim
×4
Technic Axle and Pin Connector Perpendicular Double Split [Reinforced]
×4
Technic Beam 1 x 15 Thick with Alternating Holes
×4
Technic Axle and Pin Connector Perpendicular Split
×4
Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes]
×3
Technic Panel 3 x 11 x 1
×3
Pneumatic Switch with Pin Holes, Axle Hole and Stepped Outlets
×3
Technic Axle and Pin Connector Angled #1
×3
Technic Beam 1 x 11 Thick
×3
Technic Pin Long without Friction Ridges, with Anti-Roll Notch
×3
Technic Beam 1 x 13 Thick
×3
Technic Pin Connector Perpendicular 2 x 2 Bent
×3
Technic Tooth 1 x 3 with Axle Hole [Hollow Underside]
×3
Hose, Pneumatic 4mm D. 29L / 232mm
×3
Technic Axle 5.5 with Stop [Rounded Short End]
×3
Technic Axle Connector Smooth [with x Hole + Orientation]
×3
Plate Round 1 x 1 with Solid Stud
×3
Technic Beam 5 x 11 with 3 x 5 Opening Frame Thick
×3
Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise [Centered Friction Ridge]
×3
Technic Panel Fairing 2 x 3 x 1
×3
Technic Beam 1 x 11 Thick with Alternating Holes
×3
Technic Beam 1 x 5 Thin with Axle Holes on Ends
×2
Technic Panel Fairing #21 5L Small Smooth, Side B
×2
Technic Panel Fairing #22 5L Small Smooth, Side A
×2
Pneumatic Cylinder 2 x 11 with 2 Stepped Inlets [V2]
×2
Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end
×2
Technic Pin 3/4
×2
Technic Beam 1 x 11.5 Double Bent Thick
×2
Technic Beam 1 x 5 Thin
×2
Technic Beam 1 x 6 Thin
×2
Axle Hose, Soft 7L
×2
Technic Axle 4
×2
Technic Axle 7
×2
Pneumatic T-Piece (T Bar) [New Style]
×2
Hose, Pneumatic 4mm D. 9L / 7.2cm
×2
Hose, Pneumatic 4mm D. 16L
×2
Hose, Pneumatic 4mm D. 18L / 144mm
×2
Hose, Pneumatic 4mm D. 37L / 29.6cm
×2
Slope 30° 1 x 1 x 2/3 (Cheese Slope)
×2
Technic Axle 9
×2
Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate
×2
Technic Brick 1 x 1 with Pin Hole
×2